Home > Knowledge > Content
Blow molding plastic table molding process and equipment selection
Nov 17, 2018

The blow molding plastic table is a table made by a blow molding process, and the blow molding can be divided into extrusion blow molding, injection blow molding, stretch blow molding, multilayer blow molding, and foam blow molding. The process of blow molding a plastic table generally includes preparation of raw materials, production of transport parisons, inflation of parisons, molding and trimming of quality products, and quality inspection. Once the molding method is selected, the molding process is basically determined.

When mass-producing blown plastic tables, consideration should be given to the mode of operation of the blow molding process and the auxiliary equipment that should be provided. When selecting auxiliary equipment, it is necessary to consider whether the raw materials are dry, the technical measures to be taken, the processing methods of the corner scraps, the recycling method and technical requirements, and the temperature control of the parison reheating device.

At the same time, it is necessary to control the temperature of the mold during the production process of the blow molding plastic table, the drying of the compressed air and the selection of the pressure.

https://www.everonplastic.com/


Related Industry Knowledge

Copyright © Everon Plastic Products Wuxi Co.,Ltd All Rights Reserved.